Difference between revisions of "Linux Terminal - System Information"

From Computer Science
Jump to: navigation, search
(Sample Session)
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
''This page is a part of the [[Linux and CS Systems - Getting Started]].  This page assumes you have your computer setup to connect to the CS server, or have the appropriate software installed on your computer to run commands.  Go back to the Linux and CS Systems Getting Started main page if you don't have our system setup yet.''
 
''This page is a part of the [[Linux and CS Systems - Getting Started]].  This page assumes you have your computer setup to connect to the CS server, or have the appropriate software installed on your computer to run commands.  Go back to the Linux and CS Systems Getting Started main page if you don't have our system setup yet.''
 +
 +
'''Basic idea''' These are some commands that can be run to get information about the system.
 +
 +
'''Demo''' See [https://youtu.be/kwl1F_RY_1c this demo video] for a video demonstration of the topics on this page, including running the commands on the ISU CS server.  You should start reading through this page before watching the video.
  
 
=Commands=
 
=Commands=
Line 11: Line 15:
 
* finger - see which other users are currently logged in
 
* finger - see which other users are currently logged in
 
* man - help about a command (manual). ''While using man - use q key to quit, and up/down arrows to scroll.''
 
* man - help about a command (manual). ''While using man - use q key to quit, and up/down arrows to scroll.''
 +
 +
=Sample Quiz=
 +
''An example quiz over this material.  After watching the video and trying the commands out yourself to make sure you understand.''
 +
 +
Fill in the blank, what is the linux command to do for each of the following.
 +
* get how long since last system reboot:
 +
* get information about disk free space:
 +
* get which user is currently logged in on the terminal:
 +
* get what computer you are currently running commands on:
 +
* get which directory are you inside of:
 +
* clear the terminal screen:
 +
* see which other users are currently logged in:
 +
* help about a command (manual):
 +
 +
=Sample HW=
 +
The following might be used by your instructor as part of a HW assignment to verify that you are able to use the these commands to get information about the system.
 +
 +
Create a directory to store files for this HW.  If you are given this assignment in one of your courses you will be told which directory to use.  We refer to this directory as HW_dir.
 +
# Create a file system-information.txt in your HW_dir
 +
# In the file, fill in the following
 +
#* Date when you ran these commands (dd-mm-yyyy, from date):
 +
#* Name of the computer you ran the commands on (from hostname):
 +
#* How long since last system reboot (from uptime):
 +
#* TB used and TB available in /u1 (from df -h):
 +
#* Command for getting uptime in how many weeks, days, hours, minutes (use <code>man uptime</code> and read the documentation, note that you type q to quite the manual):
  
 
=Sample Session=
 
=Sample Session=

Latest revision as of 05:07, 15 January 2020

This page is a part of the Linux and CS Systems - Getting Started. This page assumes you have your computer setup to connect to the CS server, or have the appropriate software installed on your computer to run commands. Go back to the Linux and CS Systems Getting Started main page if you don't have our system setup yet.

Basic idea These are some commands that can be run to get information about the system.

Demo See this demo video for a video demonstration of the topics on this page, including running the commands on the ISU CS server. You should start reading through this page before watching the video.

Commands

The following are some commands to print information about the system.

  • uptime - how long since last system reboot
  • df - information about disk free space
  • whoami - which user is currently logged in on the terminal
  • hostname - what computer are you currently running commands on
  • pwd - which directory are you inside of
  • clear - clear the terminal screen
  • finger - see which other users are currently logged in
  • man - help about a command (manual). While using man - use q key to quit, and up/down arrows to scroll.

Sample Quiz

An example quiz over this material. After watching the video and trying the commands out yourself to make sure you understand.

Fill in the blank, what is the linux command to do for each of the following.

  • get how long since last system reboot:
  • get information about disk free space:
  • get which user is currently logged in on the terminal:
  • get what computer you are currently running commands on:
  • get which directory are you inside of:
  • clear the terminal screen:
  • see which other users are currently logged in:
  • help about a command (manual):

Sample HW

The following might be used by your instructor as part of a HW assignment to verify that you are able to use the these commands to get information about the system.

Create a directory to store files for this HW. If you are given this assignment in one of your courses you will be told which directory to use. We refer to this directory as HW_dir.

  1. Create a file system-information.txt in your HW_dir
  2. In the file, fill in the following
    • Date when you ran these commands (dd-mm-yyyy, from date):
    • Name of the computer you ran the commands on (from hostname):
    • How long since last system reboot (from uptime):
    • TB used and TB available in /u1 (from df -h):
    • Command for getting uptime in how many weeks, days, hours, minutes (use man uptime and read the documentation, note that you type q to quite the manual):

Sample Session

The following is a transcript of the commands and screen output from the youtube video linked at the top of this page. Blank lines have been put in after each command. You can read through the transcript and think about what you think the output will be after each command is entered, and check that this is how it shows in the transcript.

Note that the transcript is for the user cs15100 logged in to the CS server.